MODULAR II

Barrel tables

• Customizable dimensions
• Customizable accessories
• Customizable worktop
• Further options

With the MODULAR II for setters and engravers, you can design your workstation according to your ideas. The design, workmanship and equipment are all of the highest standard. Set-ups in formations enable completely creative solutions for group workstations.

The sophisticated design of the robust four-legged steel frame with an open side view is perfect for versatile use. Four internal hydraulic cylinders, each with a lifting capacity of 150 kg, telescopically extend the inner steel frame upwards. The drawer containers connected to the top panel are lifted at the same time.

Product features

Table frame	Four-legged steel frame with open side view
Width	1.200 - 1.600 mm
Depth	650 - 850 mm
Height	900 - 1,200 mm

Arrange a consultation now Configure now

• Configurator

Configure your dream table

Use our intuitive table configurator to design your bespoke table. With fixed basic features and a selection of customizable options, the design freedom is in your hands. Once you have completed your configuration, send it to us and we will contact you for further coordination.

Table frame

• Four-legged steel frame with open side view

Width

• Dimensions mm

Depth

• Dimensions mm

Table frame color

• silver
• anthracite
• black

Height

• 900 - 1,200 mm

Height adjustment

• Electric
• Crank handle
• Manual

Container left

• without
• No. 01
• No. 02
• No. 03
• No. 04
• No. 05
• No. 06
• No. 07
• No. 08
• No. 09
• No. 10
• No. 11
• No. 12
• No. 13
• No. 14
• No. 15

without No. 01 No. 02 No. 03 No. 04 No. 05 No. 06 No. 07 No. 08 No. 09 No. 10 No. 11 No. 12 No. 13 No. 14 No. 15

Container right

• without
• No. 01
• No. 02
• No. 03
• No. 04
• No. 05
• No. 06
• No. 07
• No. 08
• No. 09
• No. 10
• No. 11
• No. 12
• No. 13
• No. 14
• No. 15

without No. 01 No. 02 No. 03 No. 04 No. 05 No. 06 No. 07 No. 08 No. 09 No. 10 No. 11 No. 12 No. 13 No. 14 No. 15

Body

• anthracite
• light gray
• white
• Beech decor
• Special request

Table top material

• Solid beech wood
• Solid oak
• Special request

Table top equipment

• without
• Groove milling
• Groove milling and upstand
• Backsplash I Height 1 cm
• Backsplash I Individual height

Drum trough

• Shape: angular
• Shape: round
• Shape: Special request
• without insert
• with insert

Armrests

• 5D Armrest

Armrests material & color

• Faux leather gray
• Faux leather black
• Alcantara black
• Special request

Center segment under tabletop

• Chip drawer

Optional accessories

• Drawer dividers (variable)
• Central locking container pillars
• Footrest
• Shelf attachment

Technical preparation

• Square cable entry
• Round cable gland
• Adapter for task lights
• Monitor holder
• Tablet holder
• Aluminum corner
• Microscope holder
• Technical back panel
• Modular technology rail

Technical equipment

• Built-in pressure socket A
• Built-in pressure socket B
• Boom light
• Gooseneck
• Air-vacuum distributor
• Compressed air hoses

Your comments

Width

1200-1600/100

Body

Choose the material and color of all body elements, e.g. container, drawer front, rear panel and any side panels.

anthracite

Material: Multiplex

Color: Anthracite

light gray

Material: Multiplex

Color: light grey

white

Material: Multiplex

Color: white

Beech decor

Material: Veneer

Color: Beech decor

Special request

Custom-made products are also possible on request. Please do not hesitate to contact us.

Depth

650-850/100

Your comments

Further information

Here is space for further notes, questions and special requests.

Optional accessories

Drawer dividers (variable)

All pedestal drawers are fitted with milled grooves, enabling drawer dividers to be fitted as required.
The dividers can be plugged in variably. Each set consists of 1 lengthwise divider and 3 crosswise dividers, resulting in a total of 8 compartments.

Height: 40 mm

Thickness: 3 mm

Central locking container pillars

The containers are fitted with a central lock that can be operated using a key.

Footrest

Optimize your working comfort with our height-adjustable footrest, specially designed to support ergonomic working.

Shelf attachment

Adjustable pedestal as an additional storage option, e.g. for a time scale

.

Technical preparation

Technical back panel

The closed double rear panel with 1 to 2 hinged doors (depending on the desk width) provides storage space for electrics and cabling and ensures tidy working.

Modular technology rail

The technology rail consists of individual sliding and interchangeable modules and is flush-mounted in the worktop. The modular design makes it easy to accommodate and position various accessories, such as tablet holders, lamps, cable ducts or tools, as required.

Square cable entry

Material / color: Stainless steel

Dimensions: 80 x 80 mm

Round cable gland

Material / color: Stainless steel

Dimensions: 60 mm

Adapter for task lights

Plug-in socket for holding a Waldmann lamp

.

Monitor holder

Tablet holder

For 10 inch tablet holder.

Aluminum corner

The aluminum attachment offers additional flexibility for various holders (movable microscope, lamps) as well as storage options and can be extended at any time.

Microscope holder

The microscope holder for our worktables enables easy installation and is seamless and practical thanks to the mounting option integrated into the worktop.

Delivery does not include microscope and accessories shown.

Table frame color

silver

anthracite

black

Table top equipment

without

The worktops are provided without upstands or grooves.

Groove milling

The worktops have a circumferential groove for catching small parts

.

Groove milling and upstand

The worktops have edges on 3 sides and a groove on the front for catching small parts.

Backsplash I Height 1 cm

Backsplash I Individual height

Drum trough

Shape: angular

Shape: round

Shape: Special request

without insert

with insert

Armrests material & color

Faux leather gray

Faux leather black

Alcantara black

Special request

Container left

Containers and drawers - clever & smart. Lightweight and quiet-running full-extension runners with self-closing mechanism, combined with high-quality solid wood drawers, ensure a tidy workspace thanks to their flexible organization.

without

No. 01

Container with 3 pull-outs (normal).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2:	63 mm
Drawer 3:	82 mm

*Light internal drawer dimensions

No. 02

Container with 2 pull-outs (1x normal / 1x high).

Depth:	423 mm
width:	225 mm
Drawer 1:	47 mm
Drawer 2:	180 mm

*Internal drawer dimensions

No. 03

Container with 1 pull-out (high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	255 mm

*Internal drawer dimensions

No. 04

Container with 6 pull-outs (normal).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2 - 5:	63 mm
Drawer 6:	54 mm

*Light internal drawer dimensions

No. 05

Container with 5 pull-outs (4x normal / 1x high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2 - 4:	63 mm
Drawer 5:	150 mm

*Internal drawer dimensions

No. 06

Container with 5 pull-outs (3x normal / 2x high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2 - 3:	63 mm
Drawer 4:	115 mm
Drawer 5:	97 mm

*Internal drawer dimensions

No. 07

Container with 4 pull-outs (2x normal / 2x high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2:	63 mm
Drawer 3:	158 mm
Drawer 4:	150 mm

*Internal drawer dimensions

No. 08

Container with 4 pull-outs (3x normal / 1x high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2 - 3:	63 mm
Drawer 4:	245 mm

*Internal drawer dimensions

No. 09

Container with 3 pull-outs (3x high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	138 mm
Drawer 2:	158 mm
Drawer 3:	150 mm

*Light internal drawer dimensions

No. 10

Container with 2 compartments at the top and 3 pull-outs at the bottom (normal).

Preferred for the installation of compressed air cabling.

Depth:	423 mm
Width:	225 mm
Height:	560 mm
Drawer 1:	47 mm
Drawer 2:	63 mm
Drawer 3:	54 mm

*Internal drawer dimensions

No. 11

Container with 4 compartments.

Preferred for the installation of compressed air cabling.

Depth:	423 mm
Width:	225 mm
Height:	560 mm

*Internal drawer dimensions

No. 12

Container with 3 pull-outs at the top (normal) and 2 compartments at the bottom.

Preferred for the installation of compressed air cabling.

Depth:	423 mm
Width:	225 mm
Height:	560 mm
Drawer 1:	47 mm
Drawer 2 - 3:	63 mm

*Internal drawer dimensions

No. 13

Container with 1 pull-out (normal) and 3 compartments.

Preferred for the installation of compressed air cabling.

Depth:	423 mm
width:	225 mm
height:	560 mm
Drawer 1:	47 mm

*Internal drawer dimensions

No. 14

Container with 1 pull-out, 1 compartment and 1 door.

Preferred for the installation of compressed air cabling.

Depth:	423 mm
Width:	225 mm
Height:	560 mm
Drawer 1:	47 mm
Drawer 1:	101 mm

*Light internal drawer dimensions

No. 15

Container with 1 door.

Depth:	423 mm
width:	225 mm

*clear inside dimensions

Container right

Containers and drawers - clever & smart. Lightweight and quiet-running full-extension runners with self-closing mechanism, combined with high-quality solid wood drawers, ensure a tidy workspace thanks to their flexible organization.

without

No. 01

Container with 3 pull-outs (normal).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2:	63 mm
Drawer 3:	82 mm

*Light internal drawer dimensions

No. 02

Container with 2 pull-outs (1x normal / 1x high).

Depth:	423 mm
width:	225 mm
Drawer 1:	47 mm
Drawer 2:	180 mm

*Internal drawer dimensions

No. 03

Container with 1 pull-out (high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	255 mm

*Internal drawer dimensions

No. 04

Container with 6 pull-outs (normal).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2 - 5:	63 mm
Drawer 6:	54 mm

*Light internal drawer dimensions

No. 05

Container with 5 pull-outs (4x normal / 1x high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2 - 4:	63 mm
Drawer 5:	150 mm

*Internal drawer dimensions

No. 06

Container with 5 pull-outs (3x normal / 2x high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2 - 3:	63 mm
Drawer 4:	115 mm
Drawer 5:	97 mm

*Internal drawer dimensions

No. 07

Container with 4 pull-outs (2x normal / 2x high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2:	63 mm
Drawer 3:	158 mm
Drawer 4:	150 mm

*Internal drawer dimensions

No. 08

Container with 4 pull-outs (3x normal / 1x high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	47 mm
Drawer 2 - 3:	63 mm
Drawer 4:	245 mm

*Internal drawer dimensions

No. 09

Container with 3 pull-outs (3x high).

Depth:	423 mm
Width:	225 mm
Drawer 1:	138 mm
Drawer 2:	158 mm
Drawer 3:	150 mm

*Light internal drawer dimensions

No. 10

Container with 2 compartments at the top and 3 pull-outs at the bottom (normal).

Preferred for the installation of compressed air cabling.

Depth:	423 mm
Width:	225 mm
Height:	560 mm
Drawer 1:	47 mm
Drawer 2:	63 mm
Drawer 3:	54 mm

*Internal drawer dimensions

No. 11

Container with 4 compartments.

Preferred for the installation of compressed air cabling.

Depth:	423 mm
Width:	225 mm
Height:	560 mm

*Internal drawer dimensions

No. 12

Container with 3 pull-outs at the top (normal) and 2 compartments at the bottom.

Preferred for the installation of compressed air cabling.

Depth:	423 mm
Width:	225 mm
Height:	560 mm
Drawer 1:	47 mm
Drawer 2 - 3:	63 mm

*Internal drawer dimensions

No. 13

Container with 1 pull-out (normal) and 3 compartments.

Preferred for the installation of compressed air cabling.

Depth:	423 mm
width:	225 mm
height:	560 mm
Drawer 1:	47 mm

*Internal drawer dimensions

No. 14

Container with 1 pull-out, 1 compartment and 1 door.

Preferred for the installation of compressed air cabling.

Depth:	423 mm
Width:	225 mm
Height:	560 mm
Drawer 1:	47 mm
Drawer 1:	101 mm

*Light internal drawer dimensions

No. 15

Container with 1 door.

Depth:	423 mm
width:	225 mm

*clear inside dimensions

Table frame

Four-legged steel frame with open side view

The inner steel frame extends upwards telescopically via four internal hydraulic cylinders. The drawer containers connected to the top plate are also lifted in the process.

Technical equipment

Built-in pressure socket A

1x socket outlet, can be extended when pressed

2x USB charging devices

Built-in pressure socket B

The docking station, which can be extended under pressure, is equipped with 2 flat sockets and 1 Schuko connection.

Boom light

• LED technology
• various power levels
• infinitely variable dimming
• high quality of light
• movable rods with large operating radius

Gooseneck

Gooseneck with compressed air and vacuum pin

.

Air-vacuum distributor

Central distribution unit with multiple outlets / connections and shut-off valves

.

Compressed air hoses

5 compressed air hoses are mounted in a container for connection to the devices

Height adjustment

We offer steel or aluminum table frames with three different height adjustment options for equipping ergonomic workstations:

Electric

With the convenient electric height adjustment, the hydraulic motor-driven worktable can be set to the optimum working height quickly and quietly. Memory function with storage locations for different heights. Available for tables in the Modular and Ergonomic series

.

Crank handle

With the hydraulic crank height adjustment, the table frames are moved up or down with an attachable, easy-to-operate hand crank. Available for tables in the Modular II series.

Manual

The working height of the manually height-adjustable tables can be easily adjusted using adjustment screws. Available for tables in the Modular II series.

Center segment under tabletop

Chip drawer

The large central drawer is used to collect chips and as an additional work area, such as for storing tools or as a keyboard drawer.

Armrests

Choosing the right armrests makes a significant contribution to the ergonomics of the workplace. Soft support surfaces protect your wrists and arms during assembly work.

5D Armrest

5D armrests with two ball joints. The armrests can be adjusted in any direction and can also be positioned above the tabletop.

Height

900 - 1,200 mm

Table top material

Tailored to your needs, we manufacture table tops from various materials:

Very sturdy multiplex boards with HPL coating on both sides offer a wide variety in terms of decor and color.

High-quality hardwoods are given an elaborate surface finish using painting and staining techniques.

Solid beech wood

Material: Solid beech wood

Worktop: 40 mm

Solid oak

Material: solid oak wood

Worktop: 40 mm

Special request

On request, we can offer you worktops made from special materials. Please get in touch with us about this.

Get a quote now

Your contact details

Data protection

I agree that my details from the contact form will be collected and processed to answer my request. The data will be deleted after your request has been processed. Note: You can revoke your consent at any time for the future by sending an email to info@benchalist.com. Detailed information on the handling of user data can be found in our privacy policy.

Leave this field blank

Your configuration

Would you like an individual consultation for your workbench?

Consultation

Comprehensive customer service and sustainable support.

Read on

We deliver worldwide.

Distributor search

Similar products

MODULAR III - V1

Unique X

Ergonomic SetterBench